|
|
Sony LMD2050W 20" LCD professional monitor |
|
The new LMD-2050W is an elegant 20-inch widescreen LCD monitor designed for demanding broadcast and professional applications. LCD displays are increasingly replacing CRT monitors in the professional arena due to their increased operational flexibility and lower overall ownership cost.
Redefining high performance in the mid-market sector, the new model incorporates an enhanced resolution 1680x1050 WSXGA+ LCD panel, displaying high brightness and contrast images together with a superior viewing angle of 178 degrees. The LMD-2050W offers highly accurate and consistent colour reproduction through its unique Sony ChromaTRU technology. This allows assured picture quality decisions as well as facilitating close colour matching for tiling applications. |
LMD2050W
|
Details
|
|
|
| PRODUCT FEATURES |
|
| · |
High Resolution 1680x1050 (WSXGA+) LCD Panel |
| · |
Multi-Format Signal Support up to 1080/60P (when using DVI-D input) |
| · |
Signal-interface options for SD-SDI and HD-SDI signals |
| · |
Accepts 25 factory preset computer signals via HD-15 input |
| · |
High Purity Colour Filters |
| · |
Accurate Gamma and Stable White Balance - ChromaTRU colour Processing |
| · |
Sophisticated I/P Conversion |
| · |
Excellent Brightness and Contrast |
| · |
Extremely wide 178 degree viewing angle |
| · |
Advanced Marker Settings |
| · |
Colour Temperature Selection (9300K, 6500K or user) |
| · |
Selectable Scan Size for Video Input and Aspect Ratio |
| · |
Three-colour Tally (Red, Green or Amber) |
| · |
Smart APA (Auto Pixel Alignment) for Computer Input |
| · |
Parallel Remote Control |
| · |
Stereo Audio Monitoring |
| · |
Key-Inhibit Function helps prevent inadvertent operation from the control panel |
| · |
EIA608 Closed-Caption Decoder for close captioning monitoring via composite and component inputs |
| · |
19-inch EIA rack mount via MB529 Mounting Bracket |
| · |
100mm x 100mm VESA standard allows more flexible mounting solutions |
| · |
Waveform Monitoring built-in |
| · |
Audio-Level metering |
| · |
Picture by Picture mode |
| · |
H/V Delay Function |
| · |
ACC Off |
| · |
DC Operation |
| · |
Blue-Only Mode |
| · |
Monochrome Mode |
| · |
Auto Chroma/Phase Setup |
| · |
Serial Remote (Ethernet, RS-232C, Parallel Remote) |
| · |
DVI-D Input | |
|
| PRODUCT SPECIFICATION |
|
| Picture Performance |
|
| Type |
A-Si TFT Active Matrix LCD |
| Resolution |
1680 x1050 pixels (WSXGA+) |
| Picture Size (H x W) |
Approx. 433.5 x 272.9 mm |
| Aspect |
16:10 |
| Colours |
Approx 1,677,000 colours (8bits) |
| Viewing Angle |
89/89/89/89 (typical) (up/down/left/right contrast>10:1) |
| Input |
|
| Standard Composite |
BNC x 1, 1.0 VP-p +/-3dB sync negative |
| Y/C |
4pin Mini DIN x 1
Y: 1.0 Vp-p +/-3dB sync negative,
C: 0.286 Vp-p +/-3dB (NTSC burst signal level), 0.3 Vp-p +/-3dB (PAL burst signal level) |
| RGB, Component |
BNC x 3
RGB, Component RGB : 0.7 Vp-p +/-3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p +/-3dB (75% chrominance standard colour bar signal) |
| External Sync |
BNC x 1
0.3 to 4.0 Vp-p +/-bipolarity ternary or negative polarity binary |
| Audio |
RCA pin x 2 (L, R) -5 dBu 47 k ohm or higher |
| HD15 |
D-sub 15 pin x 1,
R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync : Total level (polarity free, H/V separate and
composite sync)
Plug & Play function : corresponds to DDC-2B |
| DVI |
TMDS signal link |
| Parallel remote |
Modular connector 8 pin x 1 (pin assignment at users allocation) |
| Serial remote (LAN) |
D-sub 9-pin (RS232C) x 1,
RJ-45 modular connector (ETHERNET) x 1 (10BASE-T/100BASE-TX) |
| DC in |
XLR type 4pin x 1 DC24V (output impedance 0.005 ohm or less) |
| Optional Option inpu |
2 slots (for HD-SDI, SDI capability and extra analog I/Os) |
| Output |
|
| Standard Composite |
BNC x 1, Loop-though, with 75 ohm automatic termination |
| Y/C |
4pin mini DIN x 1 Loop-though, with 75 ohm automatic termination |
| RGB, Component |
BNC x 3, Loop-though, with 75 ohm automatic termination |
| External Sync |
BNC x 1, Loop-though, with 75 ohm automatic termination |
| Audo monitor out |
RCA pin type x 2 (L, R) |
| Speaker (Built-in) |
1 W + 1 W (stereo) |
| General |
|
| Power Requirement |
AC100V to 240V 50/60Hz 0.4A to 0.8A, DC24V 3.3A |
| Power Consumption |
Maximum Approx. 95 W (with 2 x BKM-229X) |
| Operating Temperature |
0 to 35 degrees |
| Operating Humidity |
30 to 85% (No condensation) |
| Storage & Transport Temp. |
-20 to 60 degrees |
| Storage & Transport Humidity |
0 to 90 % |
| Operating/Storage/Trans. Pressure |
700 to 1060 hPa |
| Dimensions (W x H x D) |
518.5 x 468.4 x 269.9 mm |
| Dimension without stand |
518.5 x 328.7 x 104.7 mm |
| Display Stand (W x H x D) |
320.0 x 361.5 x 269.9 mm |
| Mass With two option boards |
Approx. 10.5 kg |
| Mass Without option board |
Approx. 10.1 kg | |
|
|
|
|
