|
|
Sony PDWR1 XDCAM Deck |
|
The PDWR1 is a highly mobile field recorder. Its compact design is very similar to the existing PDWV1 model, but the PDWR1 recorder provides other functionalities such as MPEG IMX/DVCAM recording, and a wider range of interfaces. Its extremely compact, lightweight body with AC, DC or battery powered operation makes the PDWR1 ideal for use in the field as a pool-feed recorder, backup recorder, and compact recorder installed in a confined space such as a car or helicopter. |
PDWR1
|
Details
|
|
|
| PRODUCT FEATURES |
|
| · |
MPEG IMX/DVCAM recording |
| · |
Proxy AV data recording |
| · |
High-speed file transfers: 30x for Proxy, 2.5x for DVCAM, and 1.25 for MPEG IMX (50 Mb/s) files when using an i.LINK (File Access Mode) connection |
| · |
Metadata recording |
| · |
Ability to write EDL (Clip List) back onto disc |
| · |
A variety of interfaces |
| · |
RS-422A 9-pin remote interface |
| · |
Parallel recording function, which enables the decks Rec start/stop to be synchronized with the Rec start/stop of the camcorder connected via the i.LINK interface |
| · |
3.5-inch colour LCD screen |
| · |
Thumbnail search operation |
| · |
Scene selection operation |
| · |
Search speed (in colour): JOG : +/- 1 time normal speed, Shuttle : +/- 20 times normal speed |
| · |
Compact and lightweight design |
| · |
AC, DC, and battery-powered operation |
| · |
Ethernet connectivity (100Base-TX) |
| · |
i.LINK (DV Stream) output from MPEG IMX playback |
| · |
Repeat playback function |
| · |
Equipped with one optical head |
| · |
Dimensions: 230 x 105 x 340 mm |
| · |
Weight: 4.7kg | |
|
| PRODUCT SPECIFICATION |
|
| Video performance |
|
| Sampling frequency |
Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz |
| Quantisation |
10 bits/sample |
| Error correction |
Reed Solomon Code |
| Signal outputs |
|
| Analogue composite video |
BNC x1 (character out), 1.0 Vp-p, 75 &937;, sync negative |
| SDI output |
BNC x1 (character out), SMPTE 259M (ITU-R BT656-3), 270 Mb/s BNC x1 (character out), SMPTE 259M (ITU-R BT656-3), 270 Mb/s |
| Audio output |
XLR x2(channel selectable), +4/0/-3/-6dBu(selectable from menu) 600Qload, low impedance, balanced |
| Digital Audio(AES/EBU) output 1/2, 3/4 |
BNC x2, 4channels |
| Audio monitor output |
XLR can be switched to monitor by Setup Menu |
| Headphone output |
Jack x1, -16 -oo -13 dBu, 8 &937;, unbalanced |
| Signal inputs |
|
| Ref. Video |
BNC x1 , 1.0 Vp-p, 75 &937;, sync negative |
| Analogue composite video |
BNC x1 , 1.0 Vp-p, 75 &937;, sync negative |
| SDI |
BNC x1 , SMPTE 259M (ITU-R BT656-3), 270 Mb/s |
| Analogue Audio |
Analogue Audio: XLR x2(channel selectable),+4/0/-3/-6dBu(selectable from menu) 10k &937;, balanced |
| Digital Audio (AES/EBU) |
BNC x 2, 4 channels |
| Timecode |
BNC x1 |
| Other inputs/outputs |
|
| i.LINK |
IEEE 1394, DV IN/OUT or file access mode, 6-pin x 1 |
| Ethernet |
100Base-TX (RJ-45 x1) |
| RS-422A |
D-sub 9-pin x1(VTR protocol) |
| DC out |
4-pin , Supplies power of 12V DC to the BVR-3 or RM-280 Remote control unit. |
| Power consumption |
|
| Operating temperature |
+0 to +40C |
| Storage temperature |
-20 to +60C |
| Humidity |
10 to 90% |
| Storage humidity |
Less than 90% |
| Mass |
4kg |
| Dimensions (WxHxD) |
230 x 100 x 352 mm |
| Recording format |
Proxy Video: MPEG 4, Proxy Audio: A-law (8/4 ch, 8 bit, 8 kHz) |
| Recording and playback format |
Video: MPEG IMX (50/40/30 Mb/s), DVCAM (25 Mb/s), Proxy Video: MPEG 4, Audio: MPEG IMX: 8 ch/16 bit/48 kHz or 4 ch/24 bit/48 kHz DVCAM: 4 ch/16 bit/48 kHz, Proxy Audio: A-law (8/4ch, 8 bit, 8 kHz) |
| Playback time |
MPEG IMX: 50 Mb/s: 45 min., 40 Mb/s: 55 min., 30 Mb/s: 68 min. DVCAM: 85min. |
| Search speed |
Jog mode: +-1 times normal playback speed, Shuttle mode: +-20 times normal playback speed |
| General |
|
| Power requirements |
AC 100 to 240 V, 50/60 Hz, DC (with battery), 12V EXT-DC | |
|
|
|
|
